Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Well I’ve configured site-to-site vpns using ASDM several times before and everything went smoothly using the ipsec wizard , recently I got one ASA with version 8.2(1) and another with version 8.2(5) both are out of the box . The tunnel comes up norm...
I’m relatively new to ASA & I would really appreciate your help with an issue I’m having with a site-to-site VPN connection between two ASA 5505.I’ve configured the ASA with ASDM and we only need it for site-to-site VPN.The issue is that the tunnel ...
I came across this network and I’m interested to know how the VPN is functioning, I googled a lot a couldn’t find an answer so I would really appreciate your feedback------------ Corrected --------------I came across this network and I’m interested t...
I've solved the issue last week and thought I'll post how I solved it so I can close the thread the symptoms I was having was similar to the ones listed in this document PIX/ASA 7.2(1) and later: Intra-Interface Communications anyway there isn't mu...
And thanks for your suggestion Marvin, but I double checked and I didn’t copy the interface part of configuration of the second ASA so it’s also assigned to vlan2 which is the outside vlanBut I guess it is related to internal interface since I change...
Ok I've captured the commands sent by both ASA versions and they are identical so I guess Its something related to ASA 8.2(5) defualt settings , I followed Cisco's Most Common L2L and Remote Access IPsec VPN Troubleshooting Solutions but still no luc...
Thanks for your suggestion, but I'm getting assigned a permanent real IP through the ISP on ppoe connection and the other site can initiate the tunnel the issue is that the ASA with ppoe and version 8.2(5) is not detecting 192.168.1.0 traffic from i...
