Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyoneJust saw a very strange issue with Anyconnect on 9.0.3 with radius authentication with Class 25 Attribute. I have webvpn|Anyconnect configured on 5510 running 9.0.3, the authentication is done using a FreeRadius server with class 25 attri...
Hi, I just configured Anyconnect on my firewall and I am getting a error that has me stumped for last 2 days. I am running 8.2.5 version on my ASA 5520. I am getting the following error when I try to connect to the ASA SSL vpn from the web browser :"...
Hello Everyone,Is it possible to move SSL certificate + Key from one cisco asa to another ? I hope its possible and if someone can guide me towards correct documentation that would be perfect.thank you Manish
Hi Guys,I am currently getting DoS/DDoS on my asa 5520 , the attacker is hitting IP's that are not even open on any port. The attack is filling up the queues on the firewall which is at 99% CPU during the attack. here's the NetFlow info that I was ab...
Hi All, I am trying to backup the IOS from a Cisco 6506 SUP7203B but for some reason I am unable to do it for last couple days. I dont have access to the Smartnet for this Model so I wanted to save a copy of the IOS for a Backup. Here;'s the Error th...
Hi Tarek,Can you please try the following on the Access switch (in Maintenance window of course ) : monitor session 2 destination remote vlan 901 reflector-port gigX/X Where gigX/X is the trunk port ( uplink) from access to the core switch.Ref: http...
Try removing the Filter packet-type good configuration from your core switch and see if you receive any traffic.also out of curiosity, how are you checking the mirrored traffic ? Manish
Check the output of "show vlan remote-span" on all of the switches, out put should show "901" and make your that this vlan is allowed on the Trunk links and excluded from pruning as well.Post the output of "show monitor session X" from your switches...
