Hello,I have an ASA5505 where vlan1 (inside) and all associated ports (e0/1 - e0/7) are down. Workstations on vlan 1 are online and working. Vlan2 (outside) is up and running normally. I tried to shut/no shut on the vlan. I also rebooted the fire...
I'd like some advice on an output drop issue I'm having with a point-to-point T1. The output drops increment up by 200 - 700 every 15 minute interval during business hours. After hours no drops are recorded. Traffic is at approx 50% up and 20% dow...
Does anyone have a rule of thumb on how many packets per second can be transmitted on a T1 before packet loss and other problems crop up? I think i've hit my high water mark...
Hello,I have a ASA5505 and a ASA5510 successfully setup and running a site to site VPN. I can manage (SSH and ASDM) the local ASA without any problems. I'm unsuccessful when trying to manage the remote ASA. - Should I be connecting to the outside...
Here is the config:policy-map RATELIMIT class-default shape average 10000000 service-policy QOSPOLICYpolicy-map QOSPOLICY class VOICECLASS_MAP priority xxx class VIDEOCLASS_MAP priority xxx class class-default fair...
Found the problem. I worked with TAC a couple weeks ago to fix 8.2.4 to 8.4 upgrade problems on the HQ ASA. The 5505 discussed above is one of a few that VPN into the HQ ASA. While working with TAC i noticed a NAT statement that didn't seem right ...
Interfaces are down but workstations are actively communicating on them. I connected to a workstation via remote desktop to confirm the workstation and port were active. ASA5505D# show intInterface Vlan1 "inside", is down, line protocol is down Ha...
