Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,
I'm having some trouble with users losing RDP access to a remote server throughout the day. The device is an ASA 5506 running ASA 9.5 (1). The RDP server is hosted in Microsoft Azure and is being accessed through a VPN tunnel.
The page on...
Hi,
We have a VPN tunnel between our remote site and HQ.
Our HQ external ip address changed and I have changed the connection profile in the remote site ASA to the new HQ ip address but this doesn't bring the tunnel back up.
I have attached the co...
Hi All,
I hope somebody can help me with this, VPN's are not my strong point so any help would be appreciated.
Current Scenario (See Attached Diagram - ICU_Network_Schematic.pdf)We have three sites, a remote site with an ASA 5506x (config attached),...
Hello,Wondering if somebody can help me with a NAT issue I am having on our ASA.Background info.We have a remote site connected using EZVPN to our ASA in our head office. Our CCTV provider would like to access the CCTV system on site externally. Wh...
Hello,I am wondering if somebody could provide me with some advice.We currently have a LAN in one building and would like to extend the LAN to another building wirelessly, the buidlings do have a clear path of line of sight.The buidling is no more th...
Hi Rahul,
Thanks you for your reply. before i proceed with this I have managed to take a snapshot of the syslog at the exact time the application has been disconnecting. Please see attached log and advise further if you can.
Also one thing to not...
Hi Rahul,
The set peer ip address is correct, the tunnel group one is the old one.
I thought that the tunnel group ip address was just a name ? will this need to be changed ?
Thanks,
Tom
Hi Karsten,
No, remote desktop also fails, so does windows explorer traffic.
I'm a little stumped as to what troubleshooting step to take, I have performed packet tracer and it says the packet is allowed.
Thanks,
Hi Karsten,
I have finally had permission to make the changes this evening.
I have applied all commands as you proposed with one change, the network object I used was 10.0.0.0/16 and not 10.10.0.0/16.
The VPN is up between the remote site and the HQ ...
Hi Karsten,
Thank you for the extremely thorough reply.
I have attached the actual HQ config just incase this does change anything. I am awaiting a change window to open so that I can apply the configuration and I will confirm with you how it goes
...