About imad maghraoui

imad maghraoui · 06-22-2016

Hi every one, I have a big problem, when I configure the port 2960x-24TS-L switch on Speed 1000 I have this message: % LINEPROTO-5-UPDOWN: Line protocol on interface GigabitEthernet1 / 0/1, changed state to down. By cons, if I reconfigures on 100 Spe...

imad maghraoui · 06-28-2016

hi LEOhere is the exact topology:- We have a switch on the 1st floor connected in cascade with three other switches via the G 1/0/21 interfaces G1 / 0/23 and G1 / 0/24.- No VLAN set except the default VLAN1.- No port trunk.- NIC connected with the LE...

imad maghraoui · 06-27-2016

in the second table (bottom of the picture) i bypassed the patch pannel. no laptop connected in remote. Also; i've tested a 2 meters with cable of same quality ans it's work. is it a probleme of distance?

imad maghraoui · 06-27-2016

here is the result by bypassig the pannel. the first table is with laptop connected and second one is without

imad maghraoui · 06-27-2016

#Leo here is the result with unpached cable: #mark i'm bypassing the pannel, gonna send u the feedback.

imad maghraoui · 06-27-2016

gonna check it and back very soon !

Member Since	‎10-29-2013 10:13 AM
Date Last Visited	‎08-10-2021 04:31 AM
Posts	14

User Statistics

User Activity

Help !!! cable disconnected on Speed 1000 " switch 2960"

hi LEOhere is the exact

in the second table (bottom

here is the result by

#Leo here is the result with

gonna check it and back very