Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, hopefully my question is fairly easy for someone with more knowledge than me. I have a cisco pix 525. it has multiple subnets on different nic cards and currently and I am hoping to only allow one subnet to talk into the others but not vice versa...
Hi,I have a network segmented out into two pieces.Inside nic has a bunch of servers, one of which is a Wins server and ethernet1 has a segmented network which should have basically no access to the inside nic. I did not want to stand up another WINS ...
Hi, I have a cisco pix 525 with IOS 8 on it.It is configured for remote access. I want to get email notifications when someone successfully logs into the VPN. I have looked and it doesn't really seem to be a decipherable way to do this. Any help woul...
I am trying to modify my configuration to be more robust and cover some scenarios I have not previously thought about. My device is a cisco pix 525 with ios 8 on it.I have a basic configuration, the cable box comes into the house and the pix outside ...
I have a basic home setup with a cable modem, and a cisco pix. I am running a workgroup, and attempting to not stand up a domain controller, dns server or WINS server just to ping my hosts by name.From the inside, i can ping every single host by host...
hi, thanks for your replies. sorry I have been very busy lately.I am aware of the security levels on the interfaces. they are currently set to 0 on the outside interface, 50 on the lab interface and 100 on the internal interface.The problem I am havi...
hi, is that really necessary to explain how to allow wins traffic?i don't have the actual config as i am not home right now. i do however have my configuration script i have been building to reset/setup the configuration: #open hyper terminal on mach...
Hi,
Thanks for your help. I didn't think that it did support it. To go around the problem i setup a the SMTP service on my wins server.
i have two futher questions:
1: i validated that your numbers on the syslog id's are correct. is there an associ...
Hi,
Thanks for your help. I didn't think that it did support it. To go around the problem i setup a the SMTP service on my wins server.
i have two futher questions:
1: i validated that your numbers on the syslog id's are correct. is there an associ...
hi,i looked into this a little bit. i have done the following:logging enablelogging timestamplogging host inside 10.1.1.1logging list THCLogList level debugging class vpnlogging trap THCLogListlogging mail debugging THCLogListlogging recipient-addres...
