We have 2 sites (A and B) that each have their own MPLS connection through BGP. These are redistributed to OSPF, which then connects to the core switch at each respective site. We have recently installed a wireless bridge connecting site A and B that...
yeah, I kind of stopped in the middle of my thought with that last post (had to run to a meeting), but yeah, I understand Site A will need to advertise routes for Site B's subnets. I apologize for sounding silly there for a second, and confusing this...
Hi Jon,Thank you for spending some time on this over the weekend! I didn't get a chance to dig into this as much as I had wanted to over the break, but we're back in the saddle now.We advertise route summaries for 3 non-contiguous private networks (p...
Right now, the bridge is up, but not routing any traffic, because I couldn't decide how to implement a routing protocol without breaking everything. As it stands right now, Sites A and B only know about each other over the MPLS. The idea is to introd...
Ok, so my bit about the Site A vs. Site B advertisements...Let's introduce site C.Site A, B and C are all on the same MPLS. C knows the best path to 10.10/16 is through site A, and 10.20/16 is through site B.If Site A's MPLS goes down, site C still n...
We redistribute both ways (not my design!) and use route-maps to filter advertisements out per site. I'm not certain how this will affect the overall design, or simply adds the complexity of the route filtering to ensure cleanliness in advertisements...
