Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloBeen struggling with a Cisco 1120 today, no warranty left, but would like to get it running again. Tried a new disk and flashed it with tftp from rommon, also tried USB. Unit comes up with FXOS, but not able to install FTD with scope --> firmwar...
Is it me or are nothing released regarding CVE-2025-20182https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-multiprod-ikev2-dos-gPctUqv2Looked for something to patch 7.4.2 with.
Hello all.For all the years I have worked with Cisco products, ASA's, FTD's, IOS routers I have had the same problem with SNMP. If you add, remove interfaces and reboot the ASA, FTD, Router the unit reorders the interfaces and numbers no longer match...
HelloWe have a lot of clients getting the following error when contacting diffrent sites: ERR_SSL_PROTOCOL_ERROR, we have read that SonicWall and Palo Alto also have these problemes. Solution is to turn off "TLS 1.3 Hybridized Kyber Support" in chro...
Hello EveryoneWe have a fleet of FTD's and some ASA's that's being phased out. I have SSL decrypt working and have successfully tried all the functionality and it works as expected. But now I am wondering in networks with several thousand users and d...
Sorry for this post...... Just found out that if I use "show package" instead of "show image" it show the SPA file not the others. The SPA file is listed as version "7.4.2-172", if you use image it says "7.4.2.172".
I will try again, but I have used the correct files, before upload the image file list is empty, but after the upload of the SPA file, the list is populated as shown. Will take screenshots so you can see it.Thanks so far!
I can promise you I have used the correct files, after upload this is what is listed. I have done this operation on many units, never seen this problem before. I have booted and uploaded 6.4.0/7.2.2/7.4.2/.7.6.4, started from scratch with blank SSD e...
No errors I have done this several times on 1xxx and 21xx series, cant remember seeing this problem. The only thing that is new are starting with a new disk SSD (cisco). All partitions are created one first boot by fxos. Everything seems normal. That...
