Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Group, I have a pair of 4331 ISR routers connected together. Each router is connected to a WAN interface, one active the other standby. I have EIGRP running out of the WAN interface. I want to prefer the active WAN interface, over the standby i...
Hello
I have an IR829 router connected to a 3560 switch, the 829 is running IOS 15.6(3)M2
I wanted to use a pair of interfaces to connect the router to the switch
I want to configure a layer-3 port-channel with subinterfaces
I can configure the port-...
Hello, I have a Cisco 3750 with several servers connected locally, all on the same VLAN. The 3750 is connected to a wider network with various other servcies including other DHCP servers running. I would like the 3750 to act as the DHCP server for al...
HelloWe are currently running ASA9.0(3)ED on our firewalls. This is the latest release in the 9.0 train on the downloads page, dated 22/07/2013The bug above is in the latest set of advisories released 13/10/2013http://tools.cisco.com/security/center...
We can't add a firewall unfortunately - need to use ZBF
So looks like I can configure a trunk (not sure how the VLAN allowed bit works)
Then configure SVIs on the router for each VLAN
Then configure Zones
The assign the Zones to SVIs
Then implement Z...
Thanks for the reply
I want to bring several VLANs into the router on an 802.1Q trunk
Then do some zone based firewalling between the subinterfaces and/or the WAN interface
Do you think i am going to be able to configure this?