About malakipaa

malakipaa · 03-19-2020

Hello, This is a home setup and I am stuck with burned 2 days of troubleshooting on and off. I am an intermediate Cisco technician with CCNA with few yrs of practice. I believe I reformatted my flash for the 3825 router just to clean it up since I th...

malakipaa · 08-22-2014

Good day experts,I am not an expert and would like to get help with my objectives.What I have is IP phone and Analog phone connected to 3825 (CME 8.6) and connected to SIP ITSP.What I want to do is for IP phone and Analog phone to ring at the same ti...

malakipaa · 08-13-2014

Good day experts. I have a bit of dillema. I got the hw in subject installed together but can't see the 4 voice ports in IOS. I have research everywhere and can't get a clear answer. The only sort of guess I'm getting is because I don't have any pvd...

malakipaa · 11-14-2013

Hello everyone,I have pretty basic setup. I'm desperate here and need assistance. My 3750 is ipbase ios 12.2. I have been trying to find solution for a week now.I got 2 vlans 10 and 20 and one layer 3 port 10.1.10.254 connected to internet router 10...

malakipaa · 11-14-2013

Hello everyone,I'm kind of desperate here and need expert assistance.I've setup vlan 10 and 20 and Intervlan ping are ok.Vlans are has their own dhcp server and clients are getting ip address with the default gateway pointing to SVI address.Setup one...

malakipaa · 03-19-2020

HI Christian, I have solved the issue. The main issue is that all of the private keys on this router has been expired or corrupted. So I deleted all the Trustpoint certificates and recreated them. By using this command "debug crypto pki messages" I...

malakipaa · 03-19-2020

Hi Cristian, Thanks for your help and quick reply and verifying to me that 3825 doesn't need license for ssl vpn. I can breath after that. I know I needed help from experts. I have been pulling my hair with this issue. I have run on my config many t...

malakipaa · 08-23-2014

Hello all I have successfully converted analog phone into sccp. It has now its own extension number of 300. But now I need to be able to dial outside. How can I do this without assigning any of the phone with my full DID number with cme 8.6. I believ...

malakipaa · 08-23-2014

Hi Nipun, I have realized that the hunt group you have provided will only work for IP phone and not for analog phone via fxs port. Is there a way I can do this with cme 8.6? Thanks.

malakipaa · 08-23-2014

Hi, thanks I'll try this.

Member Since	‎11-14-2013 04:43 AM
Date Last Visited	‎03-20-2020 12:07 AM
Posts	20

User Statistics

User Activity

Cisco 3825 Router SSL VPN suddenly stop working after few years of no issue

CME 8.6 with IP phone and Analog Phone (Cisco 3825 + Vic2fxs )

cisco 3825 and vic-4fxs no voice port

3750 inter vlan ok but no internet

Cisco switch 3750 inter vlan ok but can't connect to internet

Re: Cisco 3825 Router SSL VPN suddenly stop working after few years of no issue

Re: Cisco 3825 Router SSL VPN suddenly stop working after few years of no issue

Hello all I have successfully

Hi Nipun,

Hi, thanks I'll try this.