Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi i recently completed a CCENT and am now moving onto to CCNA. I came across a network recently shown in the attachment that had a problem and i have a few questions and am trying to debug it. Any suggestions would be appreicated.Device a sends info...
okay so i set up a Layer3 switch at home for testing with 2 vlans, vlan 10 and vlan 20- I can ping between the vlans.i cant get onto the intenet however- i have an isp cisco modem/wireless router which has 4 ports on it, i connected a port from this ...
there is no cisco router on the network- some form of sonicwall which doesnt have vlan capability.i would try to do the routing on the 3550.(between vlans)If you do routing on the 3550 and if you want Internet access then the 3550 does need a default...
Switch 4 would be part of vlan20.The server needs to communicate with devices both in the 10.0 and 192 network.To clear this up what i was thinking of was:remove switch 1- replace with a 3550 L3 switchPut all the 192 devices on vlan 10 on the L3 swi...
Yes device a only communicates to device b.If I replaced switch 1 with a L3 switch could I put the devices in switch 2 and switch 3 in a vlan let's say vlan 10Could I then put the 10.0 devices in a vlan let's say vlan 20.Could I then connect the swit...
Thanks very muchyes the issue is between a and b, they are however industrial devices which send data directly to each other every 100ms or so, if device a doesnt send this heartbeat signal device b will stop. i cant check arp tables of devices as th...
