About gregjames00

gregjames00 · 11-20-2013

Install a UC320W with SPA525G2 phones. The phones are all conected to a SG500X-24P switch set for Voice Vlan 100 and Data Vlan 8. The UC320W is configured for Data DHCP 10.10.8.x and Voice DHCP 10.1.1.x. All the phones are getting 10.10.8.x IP addres...

gregjames00 · 11-20-2013

I finally found the problem. On the SG500X under VLAN Management -> Interface Settings all the ports were set to "Admit Untagged Only" for Frame Type. I changed it to "Admit All" and all the phones are now getting the Voice VLAN IP address of 10.1.1...

gregjames00 · 11-20-2013

It is not. The SG500X was already in place and configured. Vlan 8 Data, Vlan 100 Voice. I added the UC320W and the phones all connect the the Data Vlan. If I plug a phone into the UC320W, then it gets Vlan 100 IP address. So I guess it's the configu...

Member Since	‎11-20-2013 05:39 AM
Date Last Visited	‎09-21-2018 09:34 AM
Posts	3

User Statistics

User Activity

Phones are assigned data vlan IP not voice vlan IP

Phones are assigned data vlan IP not voice vlan IP

Phones are assigned data vlan IP not voice vlan IP