About Parm Singh

Parm Singh · 02-16-2017

Hi Guys, Hoping someone can help we have an satellite office connected back to us over 2 Metro Ethernet links 10Mb & 20Mb, for where we present internet transit. I have 4 cisco 2901s on each side of the links and tried using GLBP, to fully utilise ...

Parm Singh · 12-02-2013

Hi Guys,I wondering if someone can helpI have a 3750 connecting to our satellite office via 2 independent Metro E circuits terminated on 2911 routers. I've configured OSPF failover with ip route tracking for the HSRP. This all works well, as per t...

Parm Singh · 11-20-2013

Hi all, Need some advice pleaseWe have our office connected to our dc via two independent metro Ethernet links. 100mb &10 mb respectively. The links are provided by BT and VMB, both presented on rj45's each end. Site A we have 2 Cisco 2901's...

Parm Singh · 02-16-2017

Thanks Joseph, GLBP wont do what i need, learned the hard way :-( Now im thinking to just to use 2 HSRP groups each end (For failover) then use PBR to route traffic by class / port. I'm thinking PBR on RO-01 with tracking each end, If the 20MB lin...

Parm Singh · 02-16-2017

Hi anaid_30kadi, I'm trying weghted. logic being 40 weight to 20 weight should give me 2to1? config as below RO-01 both end on the 10MB, RO-02 on the 20Mb Head Office HQ RO-01 track 1 ip route 1.1.1.1 255.255.255.255 reachabilityinterface Loopb...

Parm Singh · 12-02-2013

Hi Jon,No the Watchgrard has no route to HQ (3750) nore is it configured for Dynamic Routing (OSPF)Hence my confusion, i'm thinkinking there must be some other device hidden on the LAN which is activly learing routes.Thanks Parm

Parm Singh · 12-02-2013

Hi Jon,That is exactly the issue.Nothing LAN side had been changed - meaning both BHX & STN point to the DG of their esiting Watchgurard their old Gateway.Hence i dont understand why traffic would strat to route through the new Cisco's, nothing has t...

Parm Singh · 12-02-2013

Sorry JonBHX & STN are on the diagram - Bottom & right respectivlyHQ is where the 3750 sitsWe had a 100 & 10MB Ethernet Extention installed into both sites back to HQPrior to this both sites has Leased Line internet acess with a Watchguard firewall, ...

Member Since	‎11-20-2013 01:16 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	11

User Statistics

User Activity

Metro ethernet Load balancing - unqual speeds - Help

OSPF Help needed

Metro failover advice

Thanks Joseph,

Hi anaid_30kadi,

OSPF Help needed

Re: OSPF Help needed

OSPF Help needed