Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our internet connectivity was intermittant all morning today so we decided to upgrade our Cisco RV320 firmware from 1.02.03 to 1.1.1.06. We downloaded the release from the Cisco Download Software onto a USB thumb drive. Using the Configuration softwa...
We installed 2 WAP551/561 in a doctor's office and did not set up a guest account for patients. We want to disable the SSID broadcast. The WAP551/561 User Guide says "Specify whether to allow the WAP device to broadcast the SSID in its beacon frames....
Thank you for your quick reply and step-by-step instructions. We have about 12 RV320's installed at client locations (we are an IT Solutions Provider) - was there a bad production batch of RV320's with faulty hardware? If so, do you know the affected...
Today, March 6, 2014, I went to download the latest firmware for the RV320 because a Cisco Small Business Support phone specialist told me the image file was updated. RV32X_FW_v1.1.1.06.bin is the exact same file that bricked my router in January 20...
I saw the previous Discussion saying to telnet into the Router and use TFTP and the "put" command to load the file. We did not enable TFTP on the now bricked router. Our attempts to TFTP into the router get a "cannot connect" error message.
