Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Having an intermittent issue whereby when Ipads or iphones connect to our guest wireless webportal and authenticates (currently set to bypass) the 'cancel' button does not dissappear and change to 'done'.Most of the time it will change to 'do...
Hi All,I'm receiving daily system errors from ACS but unsure how to fix the issue. The following is the error I receiveSeverity :ErrorTime Range :February 17, 2014 09:08:00.000 AM - February 17, 2014 09:10:00.000 AMGenerated on February 17, 2014 9:14...
Controller - WISMAP - 1142Clients - various apple and computer (802.11n capable)Hi all,I have a strange issue in my wireless network whereby all clients are associating to the network on 802.11a and 802.11g only. No clients are using 802.11n when the...
What I would suggest as a temporary solution is the set the sleep settings to 'never' We did this yesterday and all 16 ATV's onsite now broadcast over Airplay and has been for the last 24 hours. See if it works for you and perhaps it may be a tempora...
Update. It appears there is an issue with IOS 7.0 and 7.0.1 whereby it doesn't matter if the ATV's are wired or wirelessly connected, the airplay does not seem to consistently advertise. Our site had ATV's which were on older versions (5.3, 6.1) and ...
Since the upgrade of these ATV's to 7.0.1, we are having issues with seeing the Airplay broadcasted over both the wired and wireless At this site we have both wireless and wired connected ATV's. In order to test I connected a macbook air to the site(...
Thanks for your reply Scott. LSS is not enabled according to the GUI. All the mDNS values have been untouched and this is a new 8500 WLC. Yes the issue is that ATV are associated to the controller but Airplay is not seen on some of the associated ATV...
