About sbiwbi2013

sbiwbi2013 · 01-14-2014

Hi to all,up to tonight our SG 300-52MP switch worked fine.This morning nothing was working because of the following error showing up in the Flash Memory Log ...The switch only had the power LED on - all the other LEDs were off. But PoE power was ava...

sbiwbi2013 · 12-11-2013

Hello,we have a serious problem over here with some new SG 200-08P switches firmware: 1.0.6.2They are setup behind 2 SG-200 50 layer 2 switches - actual firmware 1.3.2.02.We have 4 VLANs: 1 for DATA and 2 for PHONE, 10 fpr MGMNT and 20 for GUESTS - o...

sbiwbi2013 · 11-30-2013

Hi,we just got 10 new devices with the actual fw 1.0.6.2.Two problems were coming up ...First: user and password ... The other SG 200 switches allow password with special characters like !? ... the SG 200-08 does not! That is not very helpful.And we ...

sbiwbi2013 · 01-14-2014

Hello and a Happy New Year ;-)we fixed it as you wrote by setting up the smartport settings on all the SG 300 switches.Thanks, that helped.Sent from Cisco Technical Support iPad App

sbiwbi2013 · 12-11-2013

Hi Trent,thanks for this ... where do I have to change smart port switching?I do not find any setting that is named like this on the 08-P ?!Jens-PeterSent from Cisco Technical Support iPad App

Member Since	‎11-12-2013 10:58 AM
Date Last Visited	‎08-18-2017 04:28 AM
Posts	5

User Statistics

User Activity

SG 30052 MP - Fatal Error Emergency!!!

SG 200-08P - connecting PCs and Phones

SG 200-08P config and firmware

Re: SG 200-08P - connecting PCs and Phones

Re: SG 200-08P - connecting PCs and Phones