I have a site to site VPN between a pix 501 and a 1760 rtr. I have a odd situtuation tha I have encounterd and I am looking for input. The VPN tunnel comes up successfully on both sides. I can ping across the tunel successfully. I can also issue...
I have a total of four IDS units feeding back to a Cisco Works server. The software documentation recommends a minumum build of 1 gig mememory and 1 gig processor. What would be the prefered hardware requirements for this set up.Thanks
Just a quick question I though I would put out on the table. I have a Pix 515, with a total of four DMZ's. I had to configure STATic mappings across DMZ's for certian servers. Here is my question. There are three types of Static Translations: Not...
We recently went froma single port PIX to a multiple port and DMZ setup. I am trying to figure out the best way from a topology setup to place DNS servers with in this design. Would one place a DNS server in each zone and perform zone transfers or ...
The remote isight is using a split tunnel set-up. The Remote site is useing the centeral site's DNS server and WINS server. I have tested this by peformoinga a NS lookup, and the remote site successfully uses the centeral sites servers for name res...
Gents,Makes sense. This will come in handy with some of the web projects I have going on now. Any chance anyone can send a web link to Cisco's documentation on this static command.Thanks,Brian
Chad,I do not know if this has been resolved yet or not but I did enbounter a very simaler situation, TAc Case:E71664Basicaly I was unable to perform upgrades, in some ways I am still haveing the problem and can only upgrade teh sig files by perfomr ...
