Hi,
I would like to monitor the current TX Power (dBm) and RX Power (dBm) of the controllers Optics ports on my NCS.
Logs from my NCS.
show controllers optics 0/0/0/5 pm current 30 optics 1
Optics current bucket type : Valid MIN AVG MAX Thres...
Hi, I´m working on a switch audit and I´m confused on this exception "VLANs not cleared from trunk". I know i have the Recommendation and Corrective Action, but I don´t know how to look for those Vlans that I have to remove.I mean, Which command...
Hi Jatin - I already could have access to S9300 Device, but with telnet using a configuration of Kevin (https://supportforums.cisco.com/discussion/11981766/hwtacacs-integration-acs-cisco).
I´m trying to limit the access from Shell Command Au...
Hi Kevin , I use the option TACACS+(CISCO IOS), now I can authenticate with the ACS but only by telnet .
When I try to do it by ssh it gives me the next msg "Write failed: Broken pipe"
I´m going to look for this msg to see if I can solve this.
T...
Thanks for the information I´m gonna probe this,
Do I need a vendor specific attributes ?
When I try to config the ACS v4.2 with the option "Authenticate Using" i got this.
TACACS+ (CISCO IOS)RADIUS (CISCO AIRESPACE)RADIUS (CISCO AIRONET)RADIU...
