Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I need to configure dot1x for an IP-phone (Avaya 9620) and a windows client.
The IP Phone and PC must work on same port, the PC is connected via the IP Phone.Both, the phone and the PC need to pass authentication by mac address. Authentication...
I want to build ipsec vpn tunnels from multiple ASAs 5505 (home users) to one ASA 5505 in the office.Authentication by certificates.I tried to use a configuration example to build a dynamic VPN tunnel (http://www.cisco.com/c/en/us/support/docs/securi...
I set up a cisco ASA 5505 for remote access using Cisco AnyConnect Secure Mobility Client. The clientsoftware is installed on Windows 7 machinesOnly IPsec is enabled for access, using (ASA)local userdatabase and certificate (company CA enrolled the c...
Hey Pjain2,Tnx for your answer.I found the same link, late in the afternoon, but it didn't work at once. First the commands are different for the attributes (We have ASA v9.2.4),then on the tunnel ipsec-attributes, I had to add the "peer-id-validate ...
