Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I am configuring this kind of services on a Cisco 6500 with WS-SUP720-3B: interface GigabitEthernet4/24.30description GESTIONencapsulation dot1Q 30xconnect 10.248.10.7 10030 encapsulation mpls I did not find in the datasheet the max number of thi...
Hi,
I want to know if someone could help with one problem. I have a Ring topology layer 2 closing in a ASR 9006. I am using MSTP for redundancy, but some weeks ago the network staterd to flapping, I found that one of the switches next to the ASR is ...
Hi, I need help, I have a core MPLS made by four devices. They are ASR 9006, everything works perfect, lately we installed a client that need redundancy so I configure two BGP session on my internet VRF, the problem is that I assigned to the client ...
Hi, I am trying to configure a vfi on my swicht ME-3600X. I want to have Ethernet Over MPLS multipoint-multipoint. That is why "xconnect" does not work for me. In my CORE with ASR9006 I configure the vfi like this: interface gigabitethernet0/0/0/2.2 ...
Hi, Somedays ago I had a problem with my router ASRK9. It made a traffic drop on all interfaces, I was watching the log and I see this: LC/0/1/CPU0:Sep 22 10:34:59.456 : fib_mgr[164]: %ROUTING-FIB-4-RSRC_LOW : CEF running low on DATA_TYPE_TABLE_SET r...
This is ASR configurarion for MSTP:
RP/0/RSP0/CPU0:ASR9k_#show running-config spanning-tree mst MST-CENTRO Mon Jun 20 15:43:32.577 gmtspanning-tree mst MST-CENTRO name Centro maximum hops 35 revision 10 instance 0 priority 0 ! interface GigabitEther...
Hi, I have this tool called arbor. It shows me an strange traffic from one IP, the traffic it's like 300 Mbps, nothing normal. Arbor show me the ports 53 and 113 of my server are the ones under attack. thanks
