Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
On a couple of C9500 40x in VSS I need to replace the 10Gb VSL links with 40Gb links. So I need to go from here:
stackwise-virtual
domain 255
interface TenGigabitEthernet1/0/39
stackwise-virtual link 1
!
interface TenGigabitEthernet1/0/40
...
Hi. On a big industrial plant we've replaced an old HP switch with a brand new couple of C2960x switches in stack configuration and ever since then, every 6/8 hours or so, the two fiber optics links of switch #2 go down at once. These are connected t...
Hi all,note that this is not a real life scenario, I'm just tinkering with my home lab. SWA_C2950_24P#show interfaces trunkPort Mode Encapsulation Status Native vlanFa0/11 on 802.1q trunking 1Fa0/12 on 802.1q trunking 1Fa0/21 on 802.1q trunking 1Fa0/...
Hey all. I'm trying to understand how EIGRP works regarding the best path selection and I can't figure out why it uses the lowest bandwidth in the path from A to B: according to the formula, the highest the bandwidth, the highest the metric. I'd expe...
No firmware upgrade seems to fix this issue. I have tried everything up to the current 15.2(8)E8. The logs are constantly spammed with the CHUNKSIBLINGSEXCEED error, and the whole stack reboots after a few months.
I am also experiencing the issue on ...
@at2885 I ended up having to reconfigure everything during a maintenance window, which took almost an hour. As it turns out, you can't use an additional temporary link set with a different ID, you have to completely remove the VSS configuration and r...
Hi. What if I use different VSL link IDs? Would creating an additional links set, and then removing the existing links, minimize downtime?
interface FortyGigabitEthernet1/1/1
stackwise-virtual link 2
!
interface FortyGigabitEthernet1/1/2
stackwise-...
