Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In our environment, there are two sites A site and B site, there is a network license server in A site, the license port is UDP 5160; there are some clients in B sites; Network Infrastructure:1. Site A only have a network segment 192.168.0.0/24, Site...
In My environment, there is a stact between 3750G and 3650G with port channel, now one port of the port channel group was down, below is output. please help to give a solution!!! Thanks! (The MAC is from wireless Card of laptop, so I guess this was c...
In our Environment, there a 2504 WLC with 10 LAPs( Several 2602, several 1242), there are FLEXConnect Group with local switch and Local Authentication, but there are some clients connected to WiFi with poor wireless performance, their ping value is m...
Not time-based ACL and policy.Now I find When clients are in other network (not same with MPLS router), and the time is NOT work time, all clients also can't get the license, but When clients are in the same network with MPLS router, they can certai...
the gateway is 192.168.1.1 for my wireless network. my wireless devices is laptop. below is Lync monitor report for my call.-----------------------------Audio Stream (Caller -> Callee) Codec:x-msrtaSample rate:16000 Audio FEC:TrueBandwidth estimat...
Now our wireless network link speed is high and stable, but the audio quality still have the jitter, and it is 99m for average value of ping to gateway. and the band is only set to 2.4GHz.--------------------------------------------------- Packets...
How to do the wireless site survey? my 1242 APs is without 5.0GHz antenna.in last reply, you said "esppecially more than 67", whether your meaning is that real time applications will require the signal stength more than -67dBm?
