About warhawk18

warhawk18 · 05-04-2017

Hello all, I am looking to set up seamless roaming between my RV220W and my two WAP121's. I know WDS will not work between the RV220 W and the WAP121's however if I turn off wireless on the RV220W and enable WDS on the WAP121's will I be able to a...

warhawk18 · 12-27-2013

Hello, I have recently purchased a RV220W wireless router and a WAP121 access point and i would like to allow my users to "roam" between the two networks as needed (so when the user is closer to whichever one they connect to that one since it has a b...

warhawk18 · 05-08-2017

Michael, I have one more question. If I decide to disable the wireless of my RV220W, and just use two WAP 321's for wireless will the same roaming steps apply or does having two of the same access points provide any other functionality with roaming?

warhawk18 · 05-08-2017

Ok, thank you for all the help. The link and your information here will be very helpful.

warhawk18 · 05-08-2017

Are you saying to use any of the channels listed or are you saying for each of my three access points use a different of the three channels listed? Thanks for the link as well

warhawk18 · 05-08-2017

Ah ok, Thank you very much! Do I need to adjust anything with the channels of each access point to make them operate together?

warhawk18 · 05-08-2017

Hi Michael, Thanks for the info. Since I do not have any type of wireless controller will my clients generally just latch onto the first access point they connect to and not connect to a different one if it has a better signal or is that up to the h...

Member Since	‎12-27-2013 08:50 PM
Date Last Visited	‎08-18-2017 04:28 AM
Posts	9

User Statistics

User Activity

Roaming between Cisco RV220W and 2 WAP121's

Roaming between RV220W wireless router and WAP121 Access Point

Michael,

Ok, thank you for all the

Are you saying to use any of

Ah ok, Thank you very much!

Hi Mark,