Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are managing the following routers for the customer (Soho 96, 97, 836, 837, 1721, 1841) IOS 12.3(8)T, we are allowing the customer to poll the router for MIB II information, however there are a number of MIBs that we don't want the customer to vie...
HiahI have set up a Pix firewall and believe the problems to be with the internal DNS configuration and not the Pix.I have been assigned a range of external IP addresses, for the following services:17 - BT router18 - External Wan - fixed wan19 - SMTP...
I am only a learner, I want to know what cat5 cables connect what up and how to identify which is a crossover and which is a straight through.I know that if you hold the jacks together on one the orange is all on the left and on the other the other i...
Please can you help with this, the scenario is as follows: internal ip address allocation: 192.168.1.1 - internal pix 192.168.1.2 - file server (2k domain) 192.168.1.3 - exchange server 2k - SMTP 192.168.1.3 - Outlook web access 192.168.1.7 - ftp ser...
You'd think it was easy to configure such a small company - well not so it seems!Please can you help with this, the scenario is as follows:internal ip address allocation:192.168.1.1 - internal pix192.168.1.2 - file server (2k domain)192.168.1.3 - exc...
you will find all the mibs available at this linkhttp://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1I gone more granular into the file structure and this is where the mibII object folders and leafs are.http:...
I found what I was looking for and it is at this link.http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1also the configuration to lock down the router to only view statistics and not any routing information...
had a go at all those commands and it was working fine.I wondered if there is something specific I should be setting up in Internal DNS to make this pix firewall's static mappings work.
I was given the instructions below to put an entry into my W2K Internal AD integrated DNS server, but I don't know how to configure a forwarder, please somebody help with the exact instructions of how to put this entry into DNS, what do I set up ie h...
so should I do this and get rid of dhcp altogether, I already have a scope on the real DHCP server in W2K domain: no dhcpd address 192.168.1.2-192.168.1.129 inside PDM - what if I want to set it up for a few external vpn connections, none of these ex...
