Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is a customer scenario which is as underWe would like to be able to simplify the current on boarding processes onto MobileIron and Cisco ISE if possible without compromising on our current security.The process for corporate devices would be as ...
My customer have a ISE 2.2 deployment and have a test switch, what they are trying to do as you know is the continuous requests for TACACS+ access to the network from the various support and development teams. They currently use smart cards in the PC...
Is it possible to utilise a separate physical interface on the ISE so that we separate CA authentication paths for two separate SSID’s that we need to configure for our customer. There is a requirement to utilise the same WLAN infrastructure but at t...
There are couple of questions that I need confirmation forSame user logged in from multiple locations at the same time, wired/wireless (dot1x) or via VPN. I know there isn’t anything inbuilt in ISE (?) to alert on user logged in from more than 1 loca...
One of my customer has Cisco ISE 1.4 nodes currently use SHA1 certificates. They plan to upgrade to Cisco ISE 2.x and will move to SHA2 certificates at that time. However, the upgrade will not happen until April so wondered if there is likely to be a...
Agree with Jerome here. Had just been working on a customer query where the customer was not sure if MS and MR supported Posture, however, looking at Tim's response I have just confirmed it to the customer that it does. I guess having this reflected ...
I had a follow-up call with the customer just now and here is the screen shot of what they’re trying to do.Under the Authentication policy they want to add an attribute pulled out from the AD that has a unique attribute “employee ID”.Firstly, is it p...
