Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
You could configure IP SLA on router A to fix this issue:-
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/44sg/configuration/guide/Wrapper-44SG/swipsla.html
ip sla 1
icmp-echo 4.2.2.2 source-interface FastEthernet8
timeout 20...
These messages "BGP_Router: unhandled major event code 128, minor 0 " are caused due to this bug: - CSCsu05400https://tools.cisco.com/bugsearch/bug/CSCsu05400/?reffering_site=dumpcrCurrently it is in the open state.-Amant
I don’t think that you can reactivate temporary license again once it’s expired. You may open TAC case with the licensing team to get the permanent license. -Amant
To store a complete global BGP routing table from one BGP peer, it is best to have a minimum of 512 MB or 1 GB of RAM in the router.http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a83.shtmlSo how many BGP peers, you are plann...
Could you please share the log file with us, so that we may understand the actual problem? are you trying to change MAC address using following command?Router(config-if)# mac-address ieee-address Can you also tell me the SPA name on which you are tr...
