About ciscocase

ciscocase · 09-12-2023

Hello,i have a FTD 1010 Device. Anyconnect is configured and the users are able to connect. But the clients reconnect every 4 Minutes. (MTU is already reduced to 1300, udp Port 443 is not blocked, DTLS should work) I see following in the Logs every t...

ciscocase · 10-25-2018

Hello, rebooted my asa 5506x today. After that I am not able to connect to ASDM anymore. Unable to launch device manager from ... Logfile shows: Oct 25 15:28:12 172.16.1.46 %ASA-6-725001: Starting SSL handshake with client outside:172.16.7.150/...

ciscocase · 10-25-2018

Hello,i have some trouble with a L2tp/IpSec VPN. I configured the L2tp/IpSec VPN using ASDM-Wizzard and createt a user tester during this prozess. I configured the Win10 Client an it is working. After that I added more Users. But none of them work, ...

ciscocase · 10-25-2018

Hello,i have some trouble with a L2tp/IpSec VPN. I configured the L2tp/IpSec VPN using ASDM-Wizzard and created a user tester during this prozess. I configured the Win10 Client and it is working. After that I added more users. But none of them work,...

ciscocase · 09-26-2017

Hello, i've configured a pseudowire-connection between two cisco 2811, to use some vlans on an other site. Connection works but i can only use 10% of the actual Bandwith. Something seems to slow down the pseudowire connection. Here's the related conf...

ciscocase · 09-13-2023

I've upgraded the device, anyconnect is now connected for 20 min and counting, no reconnects so far.

ciscocase · 08-09-2021

I do not know, how the AWS-VPN konfiguration looks like, but, if you want a diffrent network to join the VPN you have to define it at the remote site as well. The only other way for you to get this working, is to hide your second subnet behind an add...

ciscocase · 10-26-2018

Made a nother wr erase and put a configfile from 10 days ago in . ASDM workes, added some of the changes I did the last days, rebooted and it is still working. Rebooted some times, problem seems to be gone.

ciscocase · 10-26-2018

So, i put the customers config in one of mine ASA's and ASDM worked. I switched the ASA's, so I could run tests, with my customers ASA and my custome used my ASA instead. I copied the running-config to flash:/saved_config. Made a write erase. Followe...

ciscocase · 10-25-2018

Hello, found that article also by my self, but it did not help. Tried different ciphers but it wont work. But Thx.

Member Since	‎01-16-2014 07:02 AM
Date Last Visited	‎09-20-2023 03:12 AM
Posts	27
Total Helpful Votes Received	5

User Statistics

User Activity

Anyconnect reconnects every 4 Minutes

ASDM not working anymore

L2TP-IPSEC VPN Tunnel works only for one User

L2tp-IPSec Tunnell only work for one User

Slow l2tpv3 pseudowire, low bandwith

Re: Anyconnect reconnects every 4 Minutes

Re: AWS VPN with two source subnets

Re: ASDM not working anymore

Re: ASDM not working anymore

Re: ASDM not working anymore