Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Background:
We have some mobile tablets with LTE and wifi cababilities. They use AnyConenct to access an internal server to run dispatch software. The dispatch software requires that the tablets always communicate to the server using the same ip addr...
Hello all,I kind of got thrown into this project without much lead in. Basically we have 5 sitesSite A: HQ with ASA 5520Site B: Remote with 5505 with L2L to Site ASite C: Remote with 5505 with L2L to Site ASite Remote with 5505 with L2L to Site AS...
Hello,New to the Cisco world, so bear with me.OverviewSite - Site VPN between a Remote office 172.16.10.1/24 and Main Office with inside IP 192.168.15.22. There is a 3rd Party router with inside IP 192.168.15.1 that has access to ...
I had the same host attempt on a few off my appliances as well. I was able to block this traffic. Here's what I did: object-group network BLOCKED-NETWORKSnetwork-object host 193.27.228.247 access-list anyconnect_deny extended deny ip object-group B...
Thanks m.kafka, and sorry about the delayed response!For anyone interested in exactly how it was done with a real world example, I've modified the subnets, but modify with your subnets. *** Site A - HQ ***same-security-traffic permit intra-interfa...
The router for the 3rd Party Network at the main office is in the route statements above, 192.168.15.1Could I do access-list DYNAMIC-POLICY_PAT .....global (inside) 200 192.168.15.49nat (outside) 200 access-list DYNAMIC_POLICY_PATon the Main office ...
It seems I'm still having troubles. Attached are all the config lines ive used to attempt to get this workingroute outside 10.10.10.0 255.255.255.0 192.168.15.1 1route outside 10.10.20.0 255.255.255.0 192.168.15.1 1 access-list DYNAMIC-POLICY-PAT p...
Wonderful Jouni,I will be testing that today and will get back to you by tonight. Your understanding of my setup is exactly right. I was told by another technician that I should perform the PAT on the Main Office ASA, hence why I am working there....
