Hello; We currently are operating a campus network with two 75XX routers serving approx. 1000 users. These routers are running HSRP and Stateful NAT to allow internal users access to the Internet. ACL's are applied inbound to prevent ICMP and other M...

Hello;We have a 3725 VOIP Lab running CME with two VIC-2FXO modules. Our goal is to have our 7960 IP phones on our LAN use the VIC-2FXO ports connected to POTS lines to dial out, and for incoming calls into the POTS lines from the PSTN to ring throug...

Hello;We're trying to get our SN5420's to operate with Win2K3 servers that have Adaptec and Intel TOE cards installed. However, when the TOEs connect to the 5420, we get an "unsupported initiator version" error. Both companies advertise that their ca...

Hello;We are attempting to use SN5420's as a front-end to our SAN, and have no problems mapping LUN's through it. However, when attempting to connect to the targets through the MS ISCSI initiator or with an Intel Pro1000/T Storage Adapter, we get "un...

Hello;We currently are operating a campus network with two 75XX routers serving approx. 1000 users. These routers are running HSRP and Stateful NAT to allow internal users access to the Internet. ACL's are applied inbound to prevent ICMP and other MS...