Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ASA 5510 running 8.4(7), ASDM 7.1(1)
This is the first time I have seen this but it appears that the Global-Policy inspection map is not there at all in the default factory reset configuration. In all my past experiences with ASA this is preconfigu...
I have been tasked with coming up with a way to offload some of our WAN traffic to Site to Site VPN tunnels. I know the response that I would give when asked about this is simply upgrade your bandwidth. Unfortunately that is not an option (on a state...
I am trying to troubleshoot an issue with our VPN reachability. Everything functions normally when our WAN connection is up but when our WAN connection is lost we can no longer connect to the VPN. It's a fairly simple design and the VPN users are aut...
Thanks for the info but this brings up a question.In this scenario would the router be the gateway for the VLANs? That would mean that you are limited to the throughput limitations of the router for inter-vlan routing. One of the reasons you want to ...
So I been brainstorming about this and have some things I'd like some input on...I think ultimately we will need to "direct" traffic based on tcp ports, so I was thinking that I might be able to implement policy based routing on my router to send the...
I understand the source of confusion now.Yes there are internal LANs connected to each router. So onthe router.int1 is LANint2 is path to ASAint3 is path to wan So I didn't indicate the LAN in the diagram. Sorry in my efforts to oversimplify I didn't...
I'm not sure what else you are looking for out of my diagram. I can't share too much beyond that.You have a dedicated circuit, that is independent from your ISP connection?---YESThis dedicated circuit is used to communicate between your location and ...
Thanks for the info guys. That gives me some good starting points. So let me throw this out there....What if I have a server at a branch remote site and I would like some of the traffic originating from that server to go out the WAN interface and som...
