Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i cant sync my ntp server, im behide a double nat, i share my config interface GigabitEthernet0/0/0description LANno ip addressmedia-type sfpnegotiation auto!interface GigabitEthernet0/0/0.1description Dataencapsulation dot1Q 1 nativeip address 10.0...
I have 2802i with mobility express deploy on a existing network with rokus with a captive portal, my contrller (2802i) with last firmware is stable but when i add more aps, the apps sign but then disaper on the console i have this errors , i think ...
i have a cisco r4321 with cme with a few phone 8800, i already setup the extensions, but im unable to pickup a call from another phone, i share my setupvoice register dn 1number 100call-forward b2bua all 110call-forward b2bua busy 110call-forward b2b...
i have a cisco switch with 4 vlans, i have a printer on native vlan and it can be ping, but when we send to print it just stuck on the queue on the computer, but it respond to ping, but if we move to another vlan not native i cant even ping, im us...
i have a lan with 3 switch cisco sf300-24pp, they are fiber optic interconected all 3, i have 5 vlans, but i have a pc that has access to internet, the computer its on vlan 50, every device from the same vlan can ping the computer, but if another ...
so what are the options i have or recomend me?, on this deployment we have 40 rokus ap, and we are using now this cisco, i can see the problem pretty much remain on where the capwap ap cisco not connect to our controller if i move the anothers ap to...
