Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was curious what some of you are deploying to monitory your ACI fabrics. I have used ERSPAN in the past, but running into limitations of the amount of ERSPAN sessions per leaf. I was told to look into Copy Services. Anyone have any good info othe...
Good evening! I'm working on mutual redistribution on a pair of 7Ks OSPF<->EIGRP. The situation is my OSPF and EIGRP domains were originally built with no real design. Previous admins would just pick random ranges, so summarization is difficult to...
Good evening. I have recently stood up a new ACI fabric, but now having some trouble integrating TACACS+ authentication/authorization in ISE 2.2. The only questionable config I can think of is the device profile for the APIC where I created a custo...
So, this really isn't an issue after all. I wasn't looking at both ASBRs to see how the routing tables looked. My External EIGRP route was being injected into OSPF. The neighboring ASBR sees my EIGRP route as an OSPF route because of the redistrib...
I applied the above configuration to my 2 ASBRs and for the most part, all looks good. However, any EIGRP External routes (AD170) turn into OSPF routes and then a loop is resulting. I assume due to OSPF having an AD of 110. But, I cannot reproduce ...
FYI, I was able to get this resolved. I had to rebuild the default contract. Somehow it was hosed up, although the configuration was correct. By rebuilding the default contact, any/any was once again working and SNMP also worked.
