I've a quick qns here. I have below dial-peerdial-peer voice 64169220 voip huntstop destination-pattern 065.....T session protocol sipv2 session target ipv4:192.168.65.1 tech-prefix 065Why the tech-prefix is not added when I called to 065xxxxx? By r...
I have 2 interfaces connected to 2 seperate ISP. And I am having some problem routing the VoIP traffic from these 2 Interfaces. Int E0 ISP A(192.168.65.2)Int F0ISP B(10.0.0.2)Ip route 0.0.0.0 0.0.0.0 192.168.65.1Ip route 101.2.2.2 255.255.255.255...
interface Ethernet0/0 ip address 202.147.38.200 255.255.255.192 no ip directed-broadcast ip nat insideinterface Ethernet0/1 ip address 203.127.140.241 255.255.255.240 no ip directed-broadcast ip nat outside!ip nat inside source static 202.147.38.253 ...
Hi Netpros, I have a question for you. I want to forward all the traffic whichever come to 192.168.65.5 to 10.0.0.8, Please give me an idea how should I accomplish this. Private IP is just for example.Users->point->192.168.65.5->Forward->10.0.0.8.
isdn->as5300(A)-> Lease line ->as5300(B)->Prepaid Card Platformsometime i didnt receive the full string of digits send by as5300(A) on as5300(B). Is there any setting that need to be done other than what i have right now? Below is the setting for as5...
The hunt funtion under dial-peer is hunting between all the dial-peer with same destination-pattern. It is not for hunting lines. The answer for what you are trying to do is below. The telephone lines connected to Cisco need to be in the same huntin...