Dual ACS solution (4.2) with one ACS doing the authenticating, the other acting as a standby. Recently when accessing nortel switches, they authenticate to both ACS, as some are going to ACS2 despite their primary RADIUS server being ACS1.The ACS sol...

Have had a ACS 4.2 solution installed across 2 servers (master/slave), everything working fine with devices using it for both RADIUS and TACACS+ authentication. This week however, I have had an issue with a network group that use RADIUS as switches (...

I have users that access the network via a VPN client to a PIX 515 which authenticates to the ACS (using the default group for unknown users) which uses an external Active Directory Database. The problem I have is that as the ACS authenticates these ...

Hi, can anyone confirm if the following can be done ;2 1760 routers, both have WIC-4SW modules.Both FE ports are connected to a device that has the same IP address for its two connected FE ports. The two routers are connected together by the WIC-4ESW...

I want to set up a demo using Call Manager and 2 7960 IP phones, plus a softphone application, does anyone have any examples of this or can advise, would the following setup suffice ?2 x 7960s, ------ switch (2950?)-------Call Manager PlatformOnce th...