Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have folowing config.aaa authentication login test localaaa authentication ppp default group radius localaaa authentication ppp test localaaa authorization exec default local group radius aaa authorization exec test local aaa authorization comma...
Hi folks,I've a simple question.Why OSPF VRF does not support passive-interface command ? I want to filter OSPF Hellos because they are flooded to CPE, what is no good idea.Technical details here:Cisco Internetwork Operating System Software IOS (tm) ...
Hi tepatel,The problem has been solved.There has been a problem with aaa, especialy with authorization and authentication.When I turned it off, autocommand was successfuly executed.Here's my new config:aaa authentication login default local group tac...
Hi tepatel,Here are the debugs:ICE_BOX_TRANSACTY#sh debGeneral OS: Modem control/process activation debugging is on AAA Authentication debugging is on AAA Authorization debugging is onUDPtn debugging is onFeb 17 10:51:55.259 CET: TTY65: DSR came u...
Pay attention that passive interfaces only for group of interfaces - especially for customer's p2p links, not to other core routers! Customersare not running OSPF.It's unnenessary and insecure advertise hellos to customer's sites.
I tryed to configure passive under the global ospf process but without effect, because passive-interface command is missing there too. I'll might be to set and outgoing ACL to OSPF multicast 240.0.0.5 and put it to all my interfaces, but this requi...
A good idea is to add port 9995 , because it's used a new variants of Sasser.http://us.mcafee.com/virusInfo/default.asp?id=description&virus_k=125012Access-list inside deny tcp any any eq 9995 maxo
