About Faye

Faye · 02-09-2020

Hi All,We have a WS-C3850-24XU failed on PHY Loopback: loopback Test. The switch is stand anlone and is not connect to network.I run the command : diagnostic start switch 1 test all.After the switch finish the test and reboot I run the command : Show...

Faye · 01-06-2021

Hello Balaji,Sorry, I didn't know the picture does not go through.

Faye · 12-30-2020

Hello Balaji,The configuration file was not loaded.There is an Error.Please find the attached pictureThanks,Faye

Faye · 12-29-2020

Hello Balaji,Thank you for the fast response.Do I need to take the C195 offline before import the C170 config ?Both C170 and C195 are on the same ip subnet.Please advise.Thanks,Faye

Faye · 12-29-2020

Hello Team,I have to migrate C170 to C195 but both devices Version do not match.The C170 has AsynOS version 11.0.1-027 and the device is in production environment.The C195 has no Config and the AsynOS version 13.0.0-392 this is the lowest version.How...

Faye · 02-10-2020

Sorry for the late reply,Leo.I configured port TenG1/0/1,1/0/7 and 1/0/15 to routed ports on the WS-C3850-24XU and then configured port Gig1/0/1,1/0/7 and 1/0/15 to routed port on a WS-C3850-48P-E.The WS-C3850-24XU 3 ports LED light were amber and bo...

Member Since	‎01-01-2016 07:21 PM
Date Last Visited	‎01-06-2021 06:29 AM
Posts	6

User Statistics

User Activity

WS-C3850-24XU PHY Loopback: loopback Test : End, Status Failed

Re: Migrate from C170 to C190

Re: Migrate from C170 to C190

Re: Migrate from C170 to C190

Re: Migrate from C170 to C190

Re: WS-C3850-24XU PHY Loopback: loopback Test : End, Status Failed