About charliegray

charliegray · 05-14-2019

just like to check.i ping a local loopback address configure on C9500 switch and received a few timeout.same test repeat on C9300 and C9400 and got same result.... is this normal?

charliegray · 04-16-2019

i am trying to configure Link state tracking on C9300 switches to monitor the switch up links so that the switch can auto err-disable the down link ports when the up links PO in down.i cannot find the link state commands.Does C9000 support Link state...

charliegray · 09-27-2017

what is the different btw these 2 commands?SUMMARY STEPSconfigureterminalinterfaceinterface-idUse one of the following:auto qos voip trustauto qos trust{ cos | dscp}in what situation do we use each of them??

charliegray · 04-17-2019

C2960X switches.so if link state tracking commands not available in C9300, how / what commands to use to achieve the equivalent ???

charliegray · 04-17-2019

link state track 1 interface Port-channel1link state group 1 upstream interface GigabitEthernet1/0/11link state group 1 downstream

charliegray · 09-28-2017

i see u just quote the theory on the "auto qos voip trust" command.i still do not see the difference and in which situation when to use either of them. auto qos voip trust Vs auto qos trust dscp

Member Since	‎09-27-2017 07:24 PM
Date Last Visited	‎10-02-2019 02:03 AM
Posts	9

User Statistics

User Activity

Ping to C9000 series switches

Link sTate Tracking - C9300

Qos commands difference

Re: Link sTate Tracking - C9300

Re: Link sTate Tracking - C9300

Re: Qos commands difference