Configuring a Modem on the AUX Port for EXEC Dialin Connectivityhttp://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtmlModem-Router Connection Guidehttp://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186...
If you want 2 ethernet interfaces, the 2514 would probably be the easiest to find. If you want a router that supports cable, you may want to look at the ubr924.
With a cascade connection, the GigaStack GBIC creates a half-duplex repeater bus external to the switch fabric of the individual switches.With a star configuration (or individual point to point) you can have full duplex.1. 3 Switches A, B, C - Casca...
The 3745 can handle a T3 just fine, but you will need a different interface module. (NM-1A-T3 , NM-1T3/E3, etc.) Is the 3745 just receiving the traffic, or is it performing additional functions? (Access-lists, VPN termination, BGP, etc.)Throughput c...
