Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm preparing to convert two pair of 6506s from native IOS version 12.1(8a)E5 with redundant L2 and static routes to hybrid code. Is there converting tool available for this? I need best practice recommendations to minimize problems as these are the ...
You can not configure Etherchannel spread across two switches. Etherchannel capability is within the same switch to increase the port bandwidth. For instance, if 100Meg full duplex (= 200Meg) is not enough to support traffic for the server connectivi...
Thanks for the information. As to the reason behind this has to do with L8 and above of the OSI... politics of the company. Something that you and I do NOT care to be involved with!!! But I will try your instructor to see if he could help. Thank you.
If you have the exact error message, you can use the Cisco "output interpreter" tool which could be very helpful (but the error message must be EXACT). The URL for the output interpreter is: https://www.cisco.com/cgi-bin/Support/OutputInterpreter/hom...
If you have the MAC address, you can issue this command on the switch:"sh cam xx-xx-xx-xx-xx-xx"Where xx-xx-xx-xx-xx-xx is your mac address. If the device is on this switch, the port associated with the MAC address will be the output. If the port sho...
It depends on which PFC card your 6500 has. If you have PFC 1 or 3, you can have up to 256 HSRP group ID which means that this card will support up to 256 well-known MAC addresses. Otherwise, with PFC2, it will only support 16 unique HSRP group ID. C...
