About aspandia

aspandia · 05-17-2018

Hi Experts,I have a customer who is using self registered guest portal. They want to allow the user to have the option to select wether the user is a daily user or a contractor. If the user selects daily user, the they will get internet access direct...

aspandia · 03-29-2018

Hi All,I have a customer using ISE 2.1 P5 with anyconnect 4.5, who is doing Posture with a lease of 1 day and a PRA every 4 hours. The posture policy for PRA uses 'session: Agent-request- type equals reassessment'.The issue I am facing here, is that ...

aspandia · 03-16-2018

Hi Experts,I have an issue, where posture on anyconnect gets stuck at 26% while checking for conditions. I noticed that this is caused due to the SCCM patch definition check which has been specified in one of the conditions.It is observed that on som...

aspandia · 05-17-2018

Thanks Jason. Regards,Ashwin K P

aspandia · 04-02-2018

That's how i created the policies: I have a separate one for PRA and another for initial assessment. The issue however is that every 4 hours (configured in PRA), the lease breaks and the endpoint moves to non compliant as can be observed in the autho...

aspandia · 04-01-2018

So the requirement from my customer is to have one posture check every 4 hours, and have another set of 4 posture checks which have to be performed only once in a day (posture lease). This type of a setup would'nt be possible if i create the posture ...

Member Since	‎10-05-2017 11:46 PM
Date Last Visited	‎06-12-2018 05:59 PM
Posts	6
Total Helpful Votes Received	4

User Statistics

User Activity

ISE Guest Access: Allow visitor to select contractor or Daily user

Posture lease not applied if PRA configured

ISE Posture with Anyconnect 4.5 getting stuck at 26%

Re: ISE Guest Access: Allow visitor to select contractor or Daily user

Re: Posture lease not applied if PRA configured

Re: Posture lease not applied if PRA configured