Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all As an example, I use a lot of times the command:apic#show run leaf 109 interface ethernet 1/23;show run leaf 110 interface ethernet 1/23;I want to create an alias, an script or some in my ssh profile that it could helps to get the output bu...
Hello allI try to perform a shutdown in the physical interface via xml.But appear the error Invalid access, MO: l1PhysIfChecking the information the physical interfaces (l1PhysIf) needs a different config as the other objects.<?xml version="1.0" enco...
Hello all
We perform a Tenant span in the aci environment. The only source filter that I can see is an EPG, but I our datacenter that is a huge EPG with a lot traffic. There are some way to add an ACL or something like that to filter inside the EPG...
Hello all
access-list inside_in extended deny icmp host A host B log
access-list inside_in extended deny ip host A host B log
I would know the behaviour about the ACLs.
As I understand the ping from A to B is not allowed, but the A receive a unre...
Thank you for reply
So, to snif the traffic from one source IP <-> destination IP and copy that packets to an IP where is the wireshark, it's a good option?
There are some example as I mentioned?
Regards
J.Chimeno
Hello
We need perform the same configuration as the subject.
As requeriment of the device connected to the leaf, we need configured only the interface at different MTU as the global.
Also we will need vPC configured with different MTU.
With the new...
Hello
Yes, I know.. However, I'm not talking about the router or the interface. I'm only wants applied that rule with the only two IPs to simulating an outage between that IPs.
Checking Cisco in deep
"The Cisco "deny" ACL seems to quietly drop TCP/...
