Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configured our on-prem Cisco ISE server for RADIUS client authentication when users connect using Secure Client. The VPN authentication requests reach the ISE server, the user is correctly authenticated and ISE returns an "Access-Accept" to...
We have AnyConnect set up with Certificate validation. When we have the option unchecked (disabled) "Consider the certificate valid if revocation information can not be reached" (forcing the CRL check) our clients are unable to connect and the FMC VP...
We just upgrade to FMC v7.0.1 and afterwards we seeing an issue with a Health Alert that we cannot clear. The following is showing for one of our FTDs. At the interfaces shown are disabled interfaces on the FTD that are not in use which they should b...
We have several users who connect to our network using Anyconnect. Their laptops connect without issue and I can see an established connection. We tunnel all traffic and everything and after a few minutes all traffic stops passing across the VPN howe...
Our ISP has issued us two subnets: one is a /30 subnet and the other is a /28. For the sake of this discussion (with false IPs) the /30 is 46.181.101.212/30 with the provider assigned .213 and our WAN on .214. The /28 is 46.181.101.112/28. They are r...
I finally figured it out.....user error. I missed setting the two checkboxes for the Radius Authorization when setting up the Radius group in Secure Access. Authorization: Mark the checkbox for Authorization and select the port, by default, is 1812M...
Hello Josue,We do have the users this user in "User, Groups and Endpoint Devices". These ISE Radius users are external users (third parties) so we have them imported using CSV Provisioning since they are not in our AD or Azure directories. We set the...
This is a Secure Access and ISE integration. Attached is the config for the VPN tunnel and ISE log showing "Access_Accept" and a screenshot of Secure Access with the Failed auth.Thanks in advance!
