We had an Automated Action defined in RME to send out an email every time there was an adjacency flap in syslog. This used the sample email perl script provided, passing the message and email recipient list as parameters.Unfortunately, as an SP, this...
OID is .1.3.6.1.4.1.9.9.10.1.1.2.1 (Cisco Flash MIB)e.g. using Net-SNMP, walk .7 for description, and walk .2 for size#snmpwalk -v1 -c .1.3.6.1.4.1.9.9.10.1.1.2.1.7SNMPv2-SMI::enterprises.9.9.10.1.1.2.1.7.1 = STRING: "flash"SNMPv2-SMI::enterprises....
Hi Rachel,There are some serialization delays published (as part of VoiP documentation), but the variability is a product of the line speed, and the frame size, not the router platform.Have a look at this page, and see if this helps at all. There are...
No, I don't think you can use MD5 either.Not sure if you haven't already got this far, but to configure auth :RTR(config)#key chain test1RTR(config-keychain)#key 1RTR(config-keychain-key)#key-string and to complete itRTR(config)#rtr key-chain test1to...
Hi John,If you cannot ping the ACS server from the command line on the NNM box, then it will always be red in the NNM app.Most likely, there is some sort of icmp blocking in the path between the 2 boxes, or on the ACS box itself - allowing icmp throu...