Hello The current throughput shows 5GB but the router has 10G card as you can see show platform. can we increase into 10G? Router1#show platform hardware THroughput level The current throughput level is 5000000 kb/s Router1#show platform Chassis type: ASR1002-X Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0 ASR1002-X ok 4d08h 0/0 6XGE-BUILT-IN ok 4d08h 0/1 SPA-1X10GE-L-V2 ok 4d08h 0/2 SPA-1X10GE-L-V2 ok 4d08h R0 ASR1002-X ok, active 4d08h F0 ASR1002-X ok, active 4d08h P0 ASR1002-PWR-AC ok 4d08h P1 ASR1002-PWR-AC ok 4d08h Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 0 14012203 16.3(2r) R0 14012203 16.3(2r) F0 14012203 16.3(2r)
... View more
Hello, We are using Cisco ASR1002-X which has 2 pcs of Cisco 1-Port 10GE LAN-PHY Shared Port Adapter. we purchased this router to be able to reach 10GB utilization but the router is not passing 5GB. We are afraid the port is limited to 5GB but we are not sure. below is the router show version RouterX1#show ver Cisco IOS XE Software, Version 03.16.02b.S - Extended Support Release Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S2b, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2016 by Cisco Systems, Inc. Compiled Sat 21-May-16 09:07 by xxxx Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software. ROM: IOS-XE ROMMON 197R1 uptime is 4 days, 1 hour, 18 minutes Uptime for this control processor is 4 days, 1 hour, 20 minutes System returned to ROM by reload System image file is "bootflash:/asr1002x-universalk9.03.16.02b.S.155-3.S2b-ext.SPA.b" Last reload reason: PowerOn This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to firstname.lastname@example.org. License Level: ipbase License Type: Permanent Next reload license Level: ipbase cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1067057K/6147K bytes of memory. Processor board ID FOX2152PAPD 6 Gigabit Ethernet interfaces 2 Ten Gigabit Ethernet interfaces 32768K bytes of non-volatile configuration memory. 4194304K bytes of physical memory. 6594559K bytes of eUSB flash at bootflash:. Configuration register is 0x2102
... View more
I am new to this forum as well as configuring ASR router with 10G fiber port.
Attached is my desgn scenario, The router has 10G SFP port where the internet is coming from and also the router has 4 GE port where i need to distribute 4 gb data to different siwtches. I have /24 public IP for using internally. is there a way to configure one GE ports to be configured as the Gateway while the the rest to behave live switch ports, where internet will be available?
Is there a way to configure this router so that the 10g fiber optic will be the exchanging point between me and the servcie provider and the 4 GE to be the gateway. (One gateway) since i have /24 IP.
Sorry if I am making confusion.
... View more