cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4088
Views
5
Helpful
2
Replies

Cisco ASR1002-X Cisco 1-Port 10GE LAN-PHY Shared Port Adapter capacity

Hirmo
Level 1
Level 1

Hello,

 

We are using Cisco ASR1002-X which has 2 pcs of Cisco 1-Port 10GE LAN-PHY Shared Port Adapter. we purchased this router to be able to reach 10GB utilization but the router is not passing 5GB. We are afraid the port is limited to 5GB but we are not sure.

 

below is the router show version 

 

RouterX1#show ver
Cisco IOS XE Software, Version 03.16.02b.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S2b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Sat 21-May-16 09:07 by xxxx


Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

197R1 uptime is 4 days, 1 hour, 18 minutes
Uptime for this control processor is 4 days, 1 hour, 20 minutes
System returned to ROM by reload
System image file is "bootflash:/asr1002x-universalk9.03.16.02b.S.155-3.S2b-ext.SPA.b"
Last reload reason: PowerOn

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase

cisco ASR1002-X (2RU-X) processor (revision 2KP) with 1067057K/6147K bytes of memory.
Processor board ID FOX2152PAPD
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
6594559K bytes of eUSB flash at bootflash:.

Configuration register is 0x2102

 

1 Accepted Solution

Accepted Solutions

Aries Fernandes
Cisco Employee
Cisco Employee

If not wrong, I am hoping you should have purchased the license to move beyond 5Gbps. The '

show platform hardware throughput level' should tell you how much you currently are at.

 

Thanks,

Aries

 

View solution in original post

2 Replies 2

Aries Fernandes
Cisco Employee
Cisco Employee

If not wrong, I am hoping you should have purchased the license to move beyond 5Gbps. The '

show platform hardware throughput level' should tell you how much you currently are at.

 

Thanks,

Aries

 

Hello

 

The current throughput shows 5GB but the router has 10G card as you can see show platform. can we increase into 10G?

 

Router1#show platform hardware THroughput level
The current throughput level is 5000000 kb/s

Router1#show platform
Chassis type: ASR1002-X

Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-X ok 4d08h
0/0 6XGE-BUILT-IN ok 4d08h
0/1 SPA-1X10GE-L-V2 ok 4d08h
0/2 SPA-1X10GE-L-V2 ok 4d08h
R0 ASR1002-X ok, active 4d08h
F0 ASR1002-X ok, active 4d08h
P0 ASR1002-PWR-AC ok 4d08h
P1 ASR1002-PWR-AC ok 4d08h

Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 14012203 16.3(2r)
R0 14012203 16.3(2r)
F0 14012203 16.3(2r)

 

 

 

Review Cisco Networking for a $25 gift card