About pedrick01

pedrick01 · 03-10-2015

Good Day, I have a SG200-26 switch for a small business network that is giving me some odd issue. We have a Cable Broadband connection for Internet service, (Cable Modem), that is plugged into a Gig port on the switch. In our office space we have ...

pedrick01 · 03-13-2015

Good Morning, I was able to configure the network in a model similar to your suggestion. I was able to locate a central location in the 3rd floor suite that had 2 network locations in close proximity. This enabled strong WiFi signal.The config end...

pedrick01 · 03-11-2015

That would be great. But, the switch room is on the 1st floor and we are on the 3rd floor, and today the Cisco E2500 provides wireless connectivity to the suite. So I was wondering if it could be an end point on the switch and still provide DHCP to...

pedrick01 · 03-11-2015

That makes sense. Kind of. Not sure why the modem would hand out a different network IP, and if it were, why my laptop and new phone would get No address as opposed to an IP from the "other" network.I do have a question that may address this. Will...

pedrick01 · 03-10-2015

I am stumped also. I am now able to get into the switch with the help of the findit tool. The IP does not seem to be in my subnet though. Does the switch automatically establish a NAT? I would not think so. The devices connected to the switch ar...

pedrick01 · 03-10-2015

Thank You for the tool, that did help. Now I need to figure out why DHCP requests are not making it to this laptop. I had to statically assign the IP to connect to the switch. Again, everything else on the network seems to be working correctly.

Member Since	‎03-10-2015 10:36 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

SG200-26 DHCP issue

Good Morning, I was able to

That would be great. But,

That makes sense. Kind of.

I am stumped also. I am now

Thank You for the tool, that