About Ahmad Saad4

Ahmad Saad4 · 01-10-2025

Hello everyone, I'm trying to use the Firewall Migration Tool (FMT v7.0.1) to migrate the config of ASA 9.12 to FMC 7.4.2. After successfully uploaded the the text file of ASA running config into FMT, and then started the conversion after selected th...

Ahmad Saad4 · 07-12-2021

Hi there, We've got two data centers that will be connected over 2x10G links, and we're deploying L3 vSAN Stretched Clusters (2x Clusters with 4 hosts node in each cluster)) across the two DCs. We are adding 4 nexus 3548-X switches to the existing ne...

Ahmad Saad4 · 06-17-2021

Hi there!I'm seeking some help and advice with our current network setup.Basically, as you can see from the network diagram attached; we're deploying vSAN Stretched Cluster between two data centers (2x Clusters with 4 hosts node in each cluster). We ...

Ahmad Saad4 · 06-07-2021

Hi there,We've got a standalone ASA 5525 which is connected to the core switch with single physical interface for the LAN and other for the Internet.Now, our ISP needs to change the IP address of the Internet link with a complete different range.So, ...

Ahmad Saad4 · 04-05-2021

Hi there!I need to add a standalone Cisco 3850-48P to an existing Cisco 3850 stack of 3 (2x48P, 1x24P)Existing Stack (3xCisco 3850) (2x48 Ports, 1x24 Ports):Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), V...

Ahmad Saad4 · 01-13-2025

Thanks for your reply. It's working now - I reinstalled FMT on a clean new folder and run from there. I just wasn't sure whether FMT 7.0.1 with FMC 7.4.2 has been tested before or not. Thanks again

Ahmad Saad4 · 01-11-2025

FYI, I've tried to upload a completely different ASA config and when started the conversion after selected the FTD, I got exactly the same error below : " Blocked (sqlite3.Operationalerror) table all_aaaservers already exists " I'm just wondering it ...

Ahmad Saad4 · 01-11-2025

Thanks for your reply. There's no AAA object config on the FMC Also, I don't see the feature to skip the AAA migration on FMT: I've feeling that it's something to do with with FMT tool itself rather than the ASA/FMC config.

Ahmad Saad4 · 04-06-2021

Thanks so much for reply.Has the firmware code 3.7.xE been discontinued? If yes, I can't see the point of upgrading it.I don't have any objections on upgrading the stack (and new member) to the recommend and stable version by Cisco if it's the right ...

Ahmad Saad4 · 02-09-2021

I'm not quite sure if the above config will work as private IP address 192.168.1.1 >> can be NAT once outside. I mean I can't see how any websites be accessible from outside.I'm thinking of what you suggested earlier :- Website A will be using port 8...

Member Since	‎10-07-2017 08:34 AM
Date Last Visited	‎01-22-2025 12:09 AM
Posts	48
Total Helpful Votes Received	5

User Statistics

User Activity

Error when parsing configuration from ASA to FMC using FMT

Configuring vPC Nexus 3548-X L3 Switch

REP protocol and Nexus 3548 switches

Create port-channel for existing physical interfaces on ASA 5525

Upgrade Cisco 3850 3.7.xE Stack

Re: Error when parsing configuration from ASA to FMC using FMT

Re: Error when parsing configuration from ASA to FMC using FMT

Re: Error when parsing configuration from ASA to FMC using FMT

Re: Upgrade Cisco 3850 3.7.xE Stack

Re: Configure DMZ NAT for web server