Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi - I have 1 access point for a small office. I wish to have 2 VLANs, one for guest users who bring their laptops into the office, and one internal vlan for company users who need access to the internal resources of the office. Reqs:1. Guest user...
Hi All. I just want to be sure that I don't miss anything here as I haven't worked with a SOHO before. Other than the standard copy tftp flash to upgrade my SOHO 97 Router from Version 12.2(8r)YN to Version 12.3(4)T1 - is there anything else I shoul...
Hi All,Current setup: internal LAN on 6509, DMZ on 2 x 2924 switches, outside on 1 x 2950-12 connected to the internet via 1720 router - the 3 LANs are connected together by a PIX520. We have two webservers on the DMZ that are currently load balanc...
Hi,I am building a PIX 520 from scratch using 6.2(2) and PDM 2.1(1). I have 3 interfaces: outside (sec0) - xx.xx.xx.xxinside (sec100) - 10.100.1.0/24dmz (sec10) - 172.16.254.0/24All was going well with the rulebase until I started on the task of all...
This is a strange one. We have a 6509 switch with the following modules:1 Cat 6k sup 1 Enhanced QoS (Active)2 Cat 6k sup 1 Enhanced QoS (Standby)3 8 port 1000mb GBIC Enhanced QoS4 8 port 1000mb GBIC Enhanced QoS5 48 port 10/100 mb RJ4...
I seem to have got it working. I changed the following command: encryption vlan 100 mode wep mandatory mic key-hash to: encryption vlan 100 mode wep mandatory ...i.e. when you remove the MIC and Per Packet Keying requirement then it works. I believ...
Facing exactly the same problem mentioned in this thread. 1231 access point with some Toshiba laptops with b cards not associating. They're the same cards as mentioned in the IBM laptops above.Anyone get anywhere with this?
