Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am working on adding three new ESXi hosts to an ACI fabric and would like these new hosts to have access to the same DVS that the current servers have access to. The current ESXi servers are connecting to a fabric interconnect which connects to th...
A company I work for recently received a DNAC with a recent order and purchased another SDA lab kit for a POV. One is configured for assurance now and we want to POV SDA on the other. Reading the scaling guide for the appliance it says we can have ...
Do you have change control enabled? You will have to approve the ticket before you can deploy if you do.Go to:Manage > Change Control > Select Ticket > Actions > submit for approvalThen:Manage > Change Control > Select Ticket > Actions > ApproveThen:...
Yes the new servers are already added in vCenter. I will have to verify that setting in the EPG but LLDP is being used in the port policy from what I recall. Thank you
Existing servers attached to the FIs have been setup with VMM integration. We want to add these UCS-C style servers and connect them directly to the leaves. Setting up new IPG using the existing AEP was my thought as well but we were unable to reac...
Thanks for the helpful answer Scott. Each site will need less than 100 pools but wanted to make sure i was reading that spec from the datasheet correctly.
Thank you for the response. Looking through the CVD we are going to use 1 VN with SGTs. My main question relates to the number of IP address pools per fabric site. SiteA - 100 ip pools assigned as /24 from the /8SiteB - 100 ip pools assigned as /2...
