Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having our CE come in to present the FWSM for 6500. I'm hoping to get some feedback from this forum a bit in advance. Does anyone have any pro's/con's regarding the FWSM, Routing (OSPF), Policies, MSFC2/SUp720 integration, Vlans? Or even desig...
I'm trying to use this:access-list 112 permit tcp any 172.16.23.0 0.0.0.255 range 46000 46030!on a 7206 router. I know the range command works fine on PIX, however, this is not working on the router, the command takes, but TCP ports within the speci...
I'm trying to create and extended IP Access-list and limit the amount of necessary lines by adding the range command.The syntax takes, but does not permit the allowed TCP Ports we need. (TAC hasn't been much help)Router = 7206NPE-G1, IOS 12.1(19)E2s...
I've seen this problem several times now. The problem is related to the synch of Exchange-FE server (OWA) with Exchange-BE. In this scenario the OWA server cannot synch correctly through the PIX.=================EXCHANGE SERVER -> PIX Inside- > Pix...
Users need to get to Web Server:1) Create a static xlate for the web serverstatic (dmz3,outside) 69.110.38.xx 30.30.30.2 netmask 255.255.255.255 2) as mentioned, you must allow outside users to access the webserver:access-list outside permit tcp any ...
This may be a matter of how Netscreen handles ICMP w/NAT. I'm running into issues with Netscreen on the other side of IPSec S2S and NAT/PAT is seeming to be one of the problems. Sending traffic w/o changing IP's.see relatedhttp://www.cisco.com/en/...
Do you have IPSec through NAT selected on the concentrator (NAT Transparent).http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2284/products_tech_note09186a00800946af.shtmlAssuming ICMP is opened on CP?
